CHAIN OIL
ClassLube
Classlubes are free flowing oils blended from turbine quality base stocks. All Classlubes are fully blended to inhibit oxidation, wear and have a unique dual anti-rust additive system to provide extra rust protection under corrosive shaft conditions. Classlube is also fortified with a tackifier to provide adhesion of the lubricant to wire ropes.
Your Forsythe Technical Representative can advise which Classlube is best suited for your particular requirements.
Features & Benefits
- Multipurpose product
- Excellent anti-rust additive
- Forms a thin film on the rope
- Excellent penetration and wetting ability
- Excellent adhesion
- Used on both friction and drum hoist ropes
- Corrosion protection right to the core of the wire rope
- Reduces fling off
- Provides ep and corrosion protection from the crown to the core of the rope
- Provides “staying power” reducing lubrication intervals
Packaging
20 litre pails, 205 litre drums, 1000 litre totes and bulk shipments as required.
Heavy & Light
Forsythe Chain Oils is an tacky lubricant developed to lubricate the chain, bar guide and drive sprocket on chain saws used in the logging industry. It is suitable for use with all types of chain saws equipped with either hand-operated or automatic oilers.
Application
- All chains, include oil baths, automatic and manual lubricated
- Saw mills, Woodlands , Conveyor systems and mining operations
- Bars and chain
Features & Benefits
- Tacky nature reduces fling-off from the chain and reduces product wastage
- Anti-corrosive properties limit failure and repair costs
- Provides good wear protection and resistance to foaming
- Red colour helps distinguish from engine oils
Packaging
20 litre pails, 205 litre drums, 1000 litre totes and bulk shipments as required.
Chain Oil 700S
Forsythe Chain Oil 700S was specially formulated for lubrication of bearings and chains at elevated temperatures (above 200° C). Typical applications include, kiln chains, kiln door hinges, paint ovens and fork lift truck chains for high temperature feeding operations.
Features & Benefits
- High flash and fire points
- Base oils selected to minimize carbon residue
- Graphite solid lubricant added
- High viscosity index oils
- Fully rust inhibited
- Safe for use in demanding applications
- Reduced maintenance cost associated with seizing and malfunction
- Reduced friction and wear results in extended equipment life
- Ease of start-up in cold temperature applications
- Protects system components in the harshest applications
Packaging
20 litre pails, 205 litre drums, 1000 litre totes and bulk shipments as required.
High Temperature Chain Oil 900
Synthetic Chain Oil
High Temperature Chain Oil 900 is a unique synthetic lubricant designed to lubricate bearings, chains, slides and gears in industrial applications where air temperatures often exceed 500° F. This product is ashless and does not contain residue forming solids.
High Temperature Chain Oil 900 is recommended for the following applications:
- Roller chains on oven conveyors
- Tenter frames in textile plants
- Paint lines, drying ovens
- Kiln support rollers, cement plants
- Lithographic chains, beverage can lines
- Kiln car wheel bearings, refractory plants
- Sealed for life units
- Bakery oven chains
Features & Benefits
- Excellent high temperature stability
- Ashless
- Low volatility
- Excellent protection against wear, corrosion, rust, and oxidation
- Optimal viscosity
- Minimal carbon and varnish formation
- Increased equipment cleanliness. Eliminates accumulation of solids
- Maintains lubricating film at elevated temperatures. Longer relubrication intervals and reduced lubricant consumption. Less smoke and no objectionable odours
- Extended equipment life and reduced maintenance costs
- Good penetration at lower application temperatures and good lubrication at higher operating temperatures
Packaging
20 litre pails, 205 litre drums, 1000 litre totes and bulk shipments as required.